JENE-PC Series I/O Modules
Online Demo | Support | 877.649.5969 USA

 

JENE-PC Series I/O Modules

The JENEsys JENE-PC series I/O modules are compact direct I/O modules used for auxiliary monitoring and control with a JENE-PC series controller or other controller platforms as identified in their respective data sheets.  The on-board I/O can be used to monitor pulse contacts from power/demand meters, analog sensors, or transducers, as well as to control energy-consuming devices such as fans, lights or pumps with digital relay outputs. Also included are analog outputs to proportionally control dampers, valves and other devices. This greatly expands the controller monitoring and control capabilities with fast, reliable, direct inputs and outputs for monitoring power, temperature, humidity and status.

Sub Categories

JM16-080404

The JENEsys® JM16 is a compact direct I/O module for auxiliary monitoring and control when used with a JENE-PC1000 or JENE-PC6000 series controller or other JENE® platforms as identified in their respective data sheets. This option expands the JENE by an additional sixteen logic-controlled points. Included are eight universal inputs, four form “A” (SPST) relay outputs, and four analog (voltage only) outputs. This greatly expands the JENE’s monitoring and control capabilities with fast, reliable, direct inputs and outputs for monitoring power, temperature, humidity, and status.

JM34-160810

The JENEsys® JM34 is a compact direct I/O module for auxiliary monitoring and control when used with a JENE-PC1000 or JENE-PC6000 series controller (JENE), or other JENEsys® platforms as identified in their respective data sheets. This option expands the JENE by an additional 34 logic-controlled points. Included are 16 universal inputs, 10 form “A” (SPST) relay outputs, and 8 analog (voltage only) outputs. This greatly expands the JENE’s monitoring and control capabilities with fast, reliable, direct inputs and outputs for monitoring power, temperature, humidity, and status. In addition, the JM34 provides power to the attached JENE, using either an externally-supplied 24Vac transformer or 24Vdc power supply.

J-T-IO-16-485

The J-T-IO-16-485 is part of the JENEsys® JENE-PC series portfolio of hardware,software, and tools designed for remote monitoring and control applications. The J-T-IO-16-485 allows the JENE-PC series controller to extend applications to include inputs and outputs remotely located up to 4,000 feet from the controller. The connection is established via an industry standard RS-485 multi-drop communication bus. up to sixteen (16) J-T-IO-16-485 devices can be utilized on a single controller providing a total of 256 I/O points.